ekorkut
19/02/2008, 16:06
Bugün Novitec e mail attım. Kısa zamanda bana geri döndüler. Mektubumu ve cevaplarını aşağıya ekliyorum.
I bought a Fiat Grande Punto 1.3 90 HP Multijet car (Year 2008) and I am
thinking of applying a Novitec PowerRail 4 unit for my car. I have some
questions concerning the powerrail 4
- Does this box only changes the rail pressure signals?
- Does it have any effect on Turbo Pressure?
- By changing which parameters you reach to claimed power increase?
- Does it have a negative effect on Diesel pump, guessing that it s the
pump operate, more than it should.
- Can the car service understand that I used you product and finish my 5
year warrant period, if I uninstall it before going to service?
- If it changes the rail pressure values, does it the board computer
show false consumption values?
-------------------------------------
Hello!
Thank you for your enquiry.
The Powerrail 4 is for Diesel engines. This powerrail increases the power
over the rail sensor. Not the pressur sensor from the turbo.
But if your car has a diesel particulate filter, then you also have to
the second stick for the turbo pressure sensor.
We only give a warranty for 2 year for the Powerrail. If you put this chip
in your car, the 5 year warranty will be finished.
Mit freundlichen Grüßen/ Regards
Novitec Automobile GmbH
René Hilse
Turbo basıncını regüle eden bir durumu olduğu için merak ettiğimden atmıştım maili. Anladığım kadarıyla particulate filter yazdığı DPF yi korumak için aynı zamanda turbo basınç sensörüne de kutunun bir ucu bağlanıyor. Turbo basıncı belli değerleri gesince, rail sensörünün sinyallerini farklı işliyor (az). Bundan dolayı benim aracım için yazdıkları değer de 105 HP gibi gözüküyor. Ama bu alette diğer kutular gibi duman atma sıkıntısı olacağını sanmıyorum. DPF ye zararlı olmadığını özellikle belirtiyorlar reklamlarında. Fiyatı da 399 EUR merak edenler için.
I bought a Fiat Grande Punto 1.3 90 HP Multijet car (Year 2008) and I am
thinking of applying a Novitec PowerRail 4 unit for my car. I have some
questions concerning the powerrail 4
- Does this box only changes the rail pressure signals?
- Does it have any effect on Turbo Pressure?
- By changing which parameters you reach to claimed power increase?
- Does it have a negative effect on Diesel pump, guessing that it s the
pump operate, more than it should.
- Can the car service understand that I used you product and finish my 5
year warrant period, if I uninstall it before going to service?
- If it changes the rail pressure values, does it the board computer
show false consumption values?
-------------------------------------
Hello!
Thank you for your enquiry.
The Powerrail 4 is for Diesel engines. This powerrail increases the power
over the rail sensor. Not the pressur sensor from the turbo.
But if your car has a diesel particulate filter, then you also have to
the second stick for the turbo pressure sensor.
We only give a warranty for 2 year for the Powerrail. If you put this chip
in your car, the 5 year warranty will be finished.
Mit freundlichen Grüßen/ Regards
Novitec Automobile GmbH
René Hilse
Turbo basıncını regüle eden bir durumu olduğu için merak ettiğimden atmıştım maili. Anladığım kadarıyla particulate filter yazdığı DPF yi korumak için aynı zamanda turbo basınç sensörüne de kutunun bir ucu bağlanıyor. Turbo basıncı belli değerleri gesince, rail sensörünün sinyallerini farklı işliyor (az). Bundan dolayı benim aracım için yazdıkları değer de 105 HP gibi gözüküyor. Ama bu alette diğer kutular gibi duman atma sıkıntısı olacağını sanmıyorum. DPF ye zararlı olmadığını özellikle belirtiyorlar reklamlarında. Fiyatı da 399 EUR merak edenler için.